The fact that Comfast range extender isn’t shown in the network list might be due to a number of factors. Weak online connections are a typical culprit. Your Internet service provider (ISP) may be at fault if it often disconnects you. Fortunately, there’s a straightforward answer to this issue. Follow the steps below. Learn what you can do to resolve this issue by reading on.
Fixed: Comfast Extender Not Showing Up
The root causes of the problem must be identified before any attempts at resolution can be made. If your Comfast range extender’s WiFi network isn’t showing up, one of these might be the problem.
-
Subpar Internet Service
Due in large part to the quality of your internet connection, Comfast WiFi extender has been removed from the network list. Verify the physical location of the Comfast extender in relation to the WiFi router to resolve the problem. Contacting your ISP is recommended if those steps do not resolve the web-related problem (ISP). It’s possible that the internet issue originates on their end.
-
Disabled Internet Access
Make sure the network administrator hasn’t turned off the WiFi for the whole building. If that’s the case, then please accept our congrats! You’ve eliminated every possible explanation for why your Comfast extender SSID is failing to appear in the network list. Follow the steps outlined below to try to fix the problem:
-
Navigate to your computer’s Network Adapter settings.
-
To choose an SSID for usage, right-click on it.
-
To turn it on, choose the Enable button.
In a lot of cases, the issue you’re having right now may be solved simply by allowing the network connection. If the issue continues, please don’t hesitate to get in touch with our support staff.
-
Incorrect Extender Setup
It’s possible you weren’t paying attention to detail during the Comfast extender configuration after all. Consider: Would you even be experiencing the network problem if you had absolutely set up your system properly? Not in any sense! Therefore, ensure that the following steps are taken during the installation of your WiFi extender:
-
You should connect the power cord of the extender to the wall outlet.
-
In order for your Comfast extender to work, it must be connected to your router in the correct manner.
-
Your device’s WiFi signals must be unobstructed at all times.
-
Put the WiFi booster in a cool, well-ventilated spot.
-
Get your device linked up with the right WiFi network.
Is Comfast extender still not functioning for you? Perhaps your extender’s firmware is either outdated or damaged, explaining the issue. You should thus update the firmware on your gadget by accessing the Comfast setup wizard.
-
Outdated Firmware
The instructions for updating the Comfast range extender’s firmware are outlined in detail below:
-
You must link your WiFi range extender to your primary router.
-
Use the ap.setup username and password to access your extender online.
-
To update the firmware, choose Firmware Update from the menu.
-
Check to see if the issue persists after updating the firmware on your Comfast extender.
-
Distance Between WiFi Devices
The distance between your range extender and primary router may also explain why it is no longer showing up in the network directory. Be careful that you have followed the wrong approach if you have placed your extender far from the router.
Get all your WiFi equipment to sit closer in one uncomplicated space. Keep a safe distance between your units and any electronic devices you may be using, such as cell phones, baby monitors, treadmills, or speakers.
Conclusion
If you have the ‘Comfast extender currently not appearing on the network list’ problem, you may fix it by following the steps outlined in this article. However, the option of resetting and doing Comfast WiFi extender setup again is always available at your disposal if you are still unable to see the extender’s network name.
